This screen contains all of the AP's basic setup functions. Most users will be able to use the AP's default settings without making any changes. If you require help during configuration, please see the user guide.
Firmware Version:       1.009--NEEDED FOR BRIDGING !
AP Name:     
LAN IP Address:      (MAC Address: 00-00-00-00-00-01 )
   Obtain an IP Address Automatically
   Specify an IP Address
. . .
   Subnet Mask:
. . .
. . .


   (MAC Address: 00-00-00-00-00-00 )
   Channel:   (Domain: USA )
   WEP:           Mandatory Disable  

AP Mode:  

   Access Point
     Access Point Client Remote AP MAC Address
     Wireless Bridge Remote Bridge MAC Address
     Wireless Bridge - Point to MultiPoint
     When set to "Access Point Client", "Wireless Bridge" or "Wireless Bridge -
   Point to MultiPoint" mode, the device will only communicate with another
   WAP 11 ver. 2.2 or WAP 11.
Backup/Restore Setting :
   Click "Backup" to store Access Point configuration on your local PC.
   Click "Restore" to restore Access Point configuration from your local PC.
Go to Linksys WebsiteSetupPassword SettingDisplay StatusLogOnline HelpAdvanced Setting