This screen contains all of the AP's basic setup functions. Most users will be able to use the AP's default settings without making any changes. If you require help during configuration, please see the user guide.
NEEDED FOR BRIDGING !
LAN IP Address:
(MAC Address: 00-00-00-00-00-01 )
Obtain an IP Address Automatically
Specify an IP Address
(MAC Address: 00-00-00-00-00-00 )
(Domain: USA )
Access Point Client
Remote AP MAC Address
Remote Bridge MAC Address
Wireless Bridge - Point to MultiPoint
When set to "Access Point Client", "Wireless Bridge" or "Wireless Bridge -
Point to MultiPoint" mode, the device will only communicate with another
WAP 11 ver. 2.2 or WAP 11.
Click "Backup" to store Access Point configuration on your local PC.
Click "Restore" to restore Access Point configuration from your local PC.